DESCRIPTION:JOINT FILLER is a ready mixed white acrylic plasterboard filler suitable for filling joints and cracks as well as smoothing and preparing surfaces prior to painting. It provides a flat and smooth final surface ready for priming and painting. It is also suitable for filling and coating cracks and holes on plaster and concrete surfaces.ADVANTAGES: Ready mixed formula Smoothes uneven surfaces Excellent workability, offers a tough smooth finish Dries fast Presents low shrinkage Forms a perfect substrate, ready for painting Interior use Rapid and clean applicationAPPLICATIONS: It is suitable for filling and coating cracks as well as smoothing and preparing plasterboards prior to painting. Filling and grouting plasterboards combined with joint tapes Fills gaps and imperfections on plaster and gypsum surfaces and constructions.SPECIFICATIONS:Coverage: 2 - 3 kg/m2Thinning: noApplication: by knifeTouch dry: 2 - 3 hours 20oCHard dry: 4 - 5 hours 20oCExterior useInterior useApplication temperature: 10oC - 35oCCleaning: with waterINSTRUCTIONS FOR USE:INSTRUCTIONS FOR USESurfaces must be dry and clean from dust, grease, loose particles and other contamination. For deeper cracks or joints application of water-based primer ISOCRYL PRIMER DUR AQUA is recommended.Smoothing surfaces Apply filler with a spatula in two layers Allow the first coat to dry before applying the secondGrouting and gap filling Place the self-sticking tape along the joint or crack Apply filler with a spatula in two layers Allow the first coat to dry before applying the second If a non self-sticking tape is used apply a first layer of filler along the joint While the product is still fresh place the tape along the joint and press it into the filler Allow the first coat to dry and follow with the second layer Allow the second coat to dry and follow with sanding to a smooth finish The final surface may be primed and painted Close lid immediately after use to prevent dryingIt is advisable to perform a suitability test prior to full scale applicationREMARKS Do not use to fill plastics or metals Do not apply in temperatures (ambient and surface) below 5oC Not suitable for repairs to permanently wet areas